{"product_id":"chevy-silverado-gmc-sierra-1500-bed-bars-xbrs-low-profile-truck-bed-cross-bars","title":"Chevy Silverado \u0026 GMC Sierra 1500 Bed Bars | XBRS Low-Profile Truck Bed Cross Bars","description":"\u003cp\u003e\u003cstrong\u003eFits 1999–2007, 2007.5–2013, 2014–2018 and 2019+ Chevy Silverado and GMC Sierra 1500. Have a 2019 Silverado LD or Sierra 1500 Limited (the older body style)? Choose 2014–2018.\u003c\/strong\u003e\u003c\/p\u003e\n\u003ch2\u003eLow-profile Chevy Silverado and GMC Sierra 1500 bed bars that grow into a full bed rack.\u003c\/h2\u003e\n\u003cp\u003eXBRS truck bed cross bars sit just above your bed rails. Haul gear, mount accessories and keep using most tonneau covers. When your build grows, XBRS converts into a full XTR1 bed rack, and from there into an XTR3 (see Upgrade to a full bed rack below).\u003c\/p\u003e\n\u003ch3\u003eWhat you can carry on XBRS\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eRooftop tent:\u003c\/strong\u003e mount it with the \u003ca href=\"https:\/\/xtrusion-overland.com\/products\/xtr1-roof-top-tent-brackets\"\u003eXTR Rooftop Tent Brackets\u003c\/a\u003e (choose XBRS at checkout). Parked, XBRS is rated to 1,500 lb, enough for the tent and the people sleeping in it, and the bed below stays free for gear.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eKayaks, paddleboards and surfboards:\u003c\/strong\u003e lay them on the bars and strap them down, so they ride above the bed and your tonneau cover. Boats longer than the bed hang past the tailgate; to carry them over the cab, upgrade to a cab-height XTR1 (see below).\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBikes, skis and fishing rods:\u003c\/strong\u003e bolt your carrier into the T-slots with 5\/16-18 drop-in T-nuts. No drilling.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRecovery and trail gear:\u003c\/strong\u003e carry a shovel, axe or traction boards on \u003ca href=\"https:\/\/xtrusion-overland.com\/products\/xtr-quick-fist-riser-mounts\"\u003eXTR Quick Fist Riser Mounts\u003c\/a\u003e and a Hi-Lift jack on \u003ca href=\"https:\/\/xtrusion-overland.com\/products\/hilift-mounts-for-1530-extrusion\"\u003eXTR Hi-Lift Jack Mounts\u003c\/a\u003e.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLights and antennas:\u003c\/strong\u003e bolt light pods, a light bar or an antenna mount into the T-slots, and run the wiring along the bars with \u003ca href=\"https:\/\/xtrusion-overland.com\/products\/t-slot-zip-clips\"\u003eT-Slot Zip Clips\u003c\/a\u003e.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eJobsite loads:\u003c\/strong\u003e ladders, lumber, pipe and conduit ride on the bars while tools stay in the bed, under your tonneau cover if you run one. Flag anything that hangs past the tailgate.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eBuilt from the same parts as our bed racks\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e6061-T6 aluminum T-slot extrusion with a black powder coat\u003c\/li\u003e\n\u003cli\u003eCNC-machined corner brackets, the same ones used on XTR1 and XTR3 racks\u003c\/li\u003e\n\u003cli\u003eFull-length T-slots for lights, recovery boards, antennas, bike mounts and MOLLE panels\u003c\/li\u003e\n\u003cli\u003eTwo heights: 6\" (6H) and 8\" (8H)\u003c\/li\u003e\n\u003cli\u003eMade in the USA: designed and built by Xtrusion Overland in Wichita, Kansas\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eChoose your mount\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eUniversal Mount:\u003c\/strong\u003e fits under most tonneau covers. The brackets give 3\" of clearance into the bed rail. Some tri-fold covers, and covers that reach farther into the bed rail, won't open fully.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRetrax XR Bedcover Mount:\u003c\/strong\u003e made for trucks with a Retrax XR cover. Want both? \u003ca href=\"https:\/\/xtrusion-overland.com\/collections\/retrax\"\u003eShop Retrax XR covers\u003c\/a\u003e.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eNot included:\u003c\/strong\u003e MOLLE plates and top braces. Add \u003ca href=\"https:\/\/xtrusion-overland.com\/products\/extra-side-brace-set-black-powder-coat\"\u003etop braces\u003c\/a\u003e.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eAccessories that fit XBRS:\u003c\/strong\u003e \u003ca href=\"https:\/\/xtrusion-overland.com\/products\/xtr-quick-fist-riser-mounts\"\u003eXTR Quick Fist Riser Mounts\u003c\/a\u003e, \u003ca href=\"https:\/\/xtrusion-overland.com\/products\/handle-t-slot-accessories\"\u003eXTR Grab Handle Kit\u003c\/a\u003e and \u003ca href=\"https:\/\/xtrusion-overland.com\/products\/t-slot-zip-clips\"\u003eT-Slot Zip Clips\u003c\/a\u003e. All mount in the XBRS T-slots.\u003c\/p\u003e\n\u003ch2\u003eUpgrade to a full bed rack\u003c\/h2\u003e\n\u003cp\u003eXBRS grows in two steps: XBRS to XTR1, then XTR1 to XTR3 whenever you're ready. Every part is sold on its own, so you only buy what each step needs. Open a step to see the parts.\u003c\/p\u003e\n\u003cdetails style=\"border-top: 1px solid rgba(128,128,128,.35);\"\u003e\n\u003csummary style=\"display: flex; justify-content: space-between; align-items: center; gap: 12px; cursor: pointer; list-style: none; padding: 14px 0; font-weight: 600;\"\u003eStep 1: XBRS to XTR1\u003cspan aria-hidden=\"true\" style=\"font-size: 20px; line-height: 1; color: #f26b21;\"\u003e+\u003c\/span\u003e\u003c\/summary\u003e\n\u003col\u003e\n\u003cli\u003eThe XTR1 Alternate Height Kit for your \u003ca href=\"https:\/\/xtrusion-overland.com\/products\/xtr1-3-alternate-height-and-conversion-kit-for-chevy-silverado-gmc-sierra-1500\"\u003eSilverado\/Sierra 1500\u003c\/a\u003e. Choose the \"XTR1 Alternate Height Kit\" option, your rack height (10\" to 26\"), and Wide Width if your XBRS has the Universal Mount or Retrax if it has the Retrax XR mount.\u003c\/li\u003e\n\u003cli\u003eTwo \u003ca href=\"https:\/\/xtrusion-overland.com\/products\/extra-side-brace-set-black-powder-coat\"\u003eXTR1 Side\/Top Brace Sets\u003c\/a\u003e: 61\"L for a short bed (5'8\") or 71\"L for a regular bed (6'6\"). Have an 8' long bed? Contact customer service first.\u003c\/li\u003e\n\u003cli\u003eFour \u003ca href=\"https:\/\/xtrusion-overland.com\/products\/off-road-reinforcement-plates-aluminum-black-rugged-powder-coat\"\u003eXTR Off-Road Reinforcement Plates\u003c\/a\u003e. Choose Quantity 4 and the 20° plates (20D Black); the 9° plates are only for the Gladiator.\u003c\/li\u003e\n\u003c\/ol\u003e\n\u003cp\u003eThe kit replaces all of your XBRS bars and raises the rack from 6\" or 8\" to any height from 10\" to 26\". Your corner brackets and bed rail brackets stay on the truck. XBRS bar lengths vary, so we don't offer a part that reuses the old bars.\u003c\/p\u003e\n\u003c\/details\u003e\n\u003cdetails style=\"border-top: 1px solid rgba(128,128,128,.35); border-bottom: 1px solid rgba(128,128,128,.35);\"\u003e\n\u003csummary style=\"display: flex; justify-content: space-between; align-items: center; gap: 12px; cursor: pointer; list-style: none; padding: 14px 0; font-weight: 600;\"\u003eStep 2: XTR1 to XTR3\u003cspan aria-hidden=\"true\" style=\"font-size: 20px; line-height: 1; color: #f26b21;\"\u003e+\u003c\/span\u003e\u003c\/summary\u003e\n\u003cp\u003eAn XTR3 adds a third crossbar and a third upright on each side.\u003c\/p\u003e\n\u003col\u003e\n\u003cli\u003eThe XTR1 to XTR3 Conversion for your \u003ca href=\"https:\/\/xtrusion-overland.com\/products\/xtr1-3-alternate-height-and-conversion-kit-for-chevy-silverado-gmc-sierra-1500\"\u003eSilverado\/Sierra 1500\u003c\/a\u003e: on the same kit page, choose the \"XTR1 to XTR3 Conversion\" option with the same bracket type and rack height as your XTR1. It includes 1 crossbar, 2 uprights, 2 corner brackets and the bed rail hardware.\u003c\/li\u003e\n\u003cli\u003eSide\/top braces: the conversion doesn't include them. Cut and tap your XTR1 braces to fit (the kit page explains how), or order \u003ca href=\"https:\/\/xtrusion-overland.com\/products\/extra-side-brace-set-for-xtr3-black-powder-coat\"\u003eXTR3 Side\/Top Brace Sets\u003c\/a\u003e in the same length as your XTR1 braces.\u003c\/li\u003e\n\u003c\/ol\u003e\n\u003cp\u003e\u003cstrong\u003eQuestions, or want to go straight from XBRS to XTR3?\u003c\/strong\u003e Contact customer service at (316)-330-0024 or \u003ca href=\"mailto:support@xtrusion-overland.com\"\u003esupport@xtrusion-overland.com\u003c\/a\u003e and we'll put the parts together for you. XBRS isn't made in 13°, so it can't convert to a 13° Soft Topper rack.\u003c\/p\u003e\n\u003c\/details\u003e\n\u003ch2\u003eFAQ\u003c\/h2\u003e\n\u003ch3\u003eWhat are the bars on a truck bed called?\u003c\/h3\u003e\n\u003cp\u003eBed bars, truck bed cross bars or crossbars. They span the bed from rail to rail and give you a mounting surface above the bed. XBRS is our low-profile version.\u003c\/p\u003e\n\u003ch3\u003eWhat is a crossbar on a truck?\u003c\/h3\u003e\n\u003cp\u003eA bar that runs side to side across the truck. On a truck bed it mounts to the bed rails, so you can strap down cargo or bolt on accessories without filling the bed.\u003c\/p\u003e\n\u003ch3\u003eAre truck bed cross bars worth it?\u003c\/h3\u003e\n\u003cp\u003eThey are if you want to carry gear above the bed and keep a tonneau cover or a low profile. XBRS starts at $732 and can be upgraded to a full XTR1 bed rack later. Full XTR1 racks start around $1,500.\u003c\/p\u003e\n\u003ch3\u003eWhat is the best cargo bar for a truck bed?\u003c\/h3\u003e\n\u003cp\u003eIt depends on the job. Ratcheting cargo bars brace loads inside the bed. Crossbars like XBRS bolt on top of the rails, so you can mount accessories and carry long items above the bed.\u003c\/p\u003e\n\u003ch3\u003eShould I get bed bars or a full bed rack?\u003c\/h3\u003e\n\u003cp\u003eBed bars if you want a low profile, a tonneau cover and a lower price. A full bed rack if you need to carry loads over the cab, mount MOLLE panels on the sides or add an awning. With XBRS you can start with bars and upgrade to an XTR1 later.\u003c\/p\u003e\n\u003ch3\u003eWill XBRS work with my tonneau cover?\u003c\/h3\u003e\n\u003cp\u003eWith most covers, yes. The Universal Mount gives 3\" of clearance into the bed rail. Some tri-fold covers, and covers that reach farther into the rail, won't open fully. Have a Retrax XR? Choose the Retrax XR Bedcover Mount.\u003c\/p\u003e\n\u003ch3\u003eShould I choose 6H or 8H?\u003c\/h3\u003e\n\u003cp\u003eXBRS comes 6\" tall (6H) or 8\" tall (8H). Choose 6H for the lowest profile, or 8H for more room under the bars. A full XTR1 bed rack runs 10\" to 26\".\u003c\/p\u003e\n\u003ch3\u003eCan I turn XBRS into a full bed rack later?\u003c\/h3\u003e\n\u003cp\u003eYes. Add the XTR1 Alternate Height Kit for your truck, two XTR1 Side\/Top Brace Sets and four 20° XTR Off-Road Reinforcement Plates. The kit replaces all of the XBRS bars, taking you from 6\" or 8\" tall to anywhere from 10\" to 26\" tall; your corner and bed rail brackets stay on. XBRS bar lengths vary, so we don't offer a part that reuses the old bars. To go on to an XTR3, add the XTR1 to XTR3 Conversion option of the same kit, XTR3 Side\/Top Brace Sets (or cut down your XTR1 braces). XBRS isn't made in 13°, so it can't convert to a 13° Soft Topper rack.\u003c\/p\u003e\n\u003ch3\u003eWill it fit my truck?\u003c\/h3\u003e\n\u003cp\u003eThis listing fits 1999–2007, 2007.5–2013, 2014–2018 and 2019+ Chevy Silverado and GMC Sierra 1500. Pick your year range. Have a 2019 Silverado LD or Sierra 1500 Limited (the older body style)? Choose 2014–2018.\u003c\/p\u003e\n\u003ch3\u003eWhat accessories fit XBRS?\u003c\/h3\u003e\n\u003cp\u003eQuick Fist riser mounts for tools, the XTR Grab Handle Kit and T-Slot Zip Clips for wiring. They all mount in the XBRS T-slots, no drilling into the bars.\u003c\/p\u003e\n\u003ch3\u003eHow much weight can XBRS carry?\u003c\/h3\u003e\n\u003cp\u003eUp to 1,500 lb static (parked), 800 lb on-road and 400 lb off-road.\u003c\/p\u003e\n\u003ch3\u003eCan I put a rooftop tent on XBRS?\u003c\/h3\u003e\n\u003cp\u003eYes. Mount it with the XTR Rooftop Tent Brackets and choose XBRS at checkout. XBRS is rated to 1,500 lb parked, enough for the tent and the people sleeping in it. On the road, keep everything on the bars, tent included, under 800 lb, or 400 lb off-road.\u003c\/p\u003e\n\u003ch3\u003eDo I have to drill to install XBRS?\u003c\/h3\u003e\n\u003cp\u003eNo. XBRS is a no-drill install.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eQuestions?\u003c\/strong\u003e Email \u003ca href=\"mailto:support@xtrusion-overland.com\"\u003esupport@xtrusion-overland.com\u003c\/a\u003e or call (316)-330-0024 and we'll help you spec your setup.\u003c\/p\u003e\n\u003chr\u003e\n\u003cp\u003e\u003cstrong\u003eMade in the USA\u003c\/strong\u003e by Xtrusion Overland in Wichita, Kansas.\u003c\/p\u003e\n\u003cp\u003e\u003cem\u003eXBRS is a product of Xtrusion Overland. Original listing: \u003ca href=\"https:\/\/xtrusion-overland.com\/products\/xbrs-crossbar-kit-for-chevrolet-silverado-gmc-sierra\"\u003extrusion-overland.com\u003c\/a\u003e\u003c\/em\u003e\u003c\/p\u003e","brand":"Xtrusion Overland","offers":[{"title":"1999-2007 \/ 6H \/ UNIVERSAL MOUNT","offer_id":67376321429579,"sku":"X01-XBRS-SISD-A-CVW-6H","price":732.0,"currency_code":"USD","in_stock":true},{"title":"1999-2007 \/ 6H \/ RETRAX XR BEDCOVER MOUNT","offer_id":67376321462347,"sku":"X01-XBRS-SISD-A-RTX-6H","price":732.0,"currency_code":"USD","in_stock":true},{"title":"1999-2007 \/ 8H \/ UNIVERSAL MOUNT","offer_id":67376321495115,"sku":"X01-XBRS-SISD-A-CVW-8H","price":754.0,"currency_code":"USD","in_stock":true},{"title":"1999-2007 \/ 8H \/ RETRAX XR BEDCOVER MOUNT","offer_id":67376321527883,"sku":"X01-XBRS-SISD-A-RTX-8H","price":754.0,"currency_code":"USD","in_stock":true},{"title":"2007.5-2013 \/ 6H \/ UNIVERSAL MOUNT","offer_id":67376321560651,"sku":"X01-XBRS-SISD-B-CVW-6H","price":732.0,"currency_code":"USD","in_stock":true},{"title":"2007.5-2013 \/ 6H \/ RETRAX XR BEDCOVER MOUNT","offer_id":67376321593419,"sku":"X01-XBRS-SISD-B-RTX-6H","price":732.0,"currency_code":"USD","in_stock":true},{"title":"2007.5-2013 \/ 8H \/ UNIVERSAL MOUNT","offer_id":67376321626187,"sku":"X01-XBRS-SISD-B-CVW-8H","price":754.0,"currency_code":"USD","in_stock":true},{"title":"2007.5-2013 \/ 8H \/ RETRAX XR BEDCOVER MOUNT","offer_id":67376321658955,"sku":"X01-XBRS-SISD-B-RTX-8H","price":754.0,"currency_code":"USD","in_stock":true},{"title":"2014-2018 \/ 6H \/ UNIVERSAL MOUNT","offer_id":67376321691723,"sku":"X01-XBRS-SISD-C-CVW-6H","price":732.0,"currency_code":"USD","in_stock":true},{"title":"2014-2018 \/ 6H \/ RETRAX XR BEDCOVER MOUNT","offer_id":67376321724491,"sku":"X01-XBRS-SISD-C-RTX-6H","price":732.0,"currency_code":"USD","in_stock":true},{"title":"2014-2018 \/ 8H \/ UNIVERSAL MOUNT","offer_id":67376321757259,"sku":"X01-XBRS-SISD-C-CVW-8H","price":754.0,"currency_code":"USD","in_stock":true},{"title":"2014-2018 \/ 8H \/ RETRAX XR BEDCOVER MOUNT","offer_id":67376321790027,"sku":"X01-XBRS-SISD-C-RTX-8H","price":754.0,"currency_code":"USD","in_stock":true},{"title":"2019+ \/ 6H \/ UNIVERSAL MOUNT","offer_id":67376321822795,"sku":"X01-XBRS-SISD-D-CVW-6H","price":732.0,"currency_code":"USD","in_stock":true},{"title":"2019+ \/ 6H \/ RETRAX XR BEDCOVER MOUNT","offer_id":67376321855563,"sku":"X01-XBRS-SISD-D-RTX-6H","price":732.0,"currency_code":"USD","in_stock":true},{"title":"2019+ \/ 8H \/ UNIVERSAL MOUNT","offer_id":67376321888331,"sku":"X01-XBRS-SISD-D-CVW-8H","price":754.0,"currency_code":"USD","in_stock":true},{"title":"2019+ \/ 8H \/ RETRAX XR BEDCOVER MOUNT","offer_id":67376321921099,"sku":"X01-XBRS-SISD-D-RTX-8H","price":754.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0660\/1342\/9835\/files\/xbrs-bed-bars-chevy-silverado-1500-trail-boss-rear.jpg?v=1793653701","url":"https:\/\/lone-wolf-overland.myshopify.com\/products\/chevy-silverado-gmc-sierra-1500-bed-bars-xbrs-low-profile-truck-bed-cross-bars","provider":"Lone Wolf Overland","version":"1.0","type":"link"}